Patiowell 5x3 FT Outdoor Storage Shed, Tool Shed with Sloping Roof and Lockable Door, Metal Shed for Backyard Garden Patio Lawn, Brown

I watched 10-15 videos of people taking several days with help. I did it in less than a day, plus a couple hours after work pre-building the roof beams, wall tops, and building, squaring, and screwing the base down to the platform I built.You need to be organized. Build the big complicated pieces first have them ready to go on. Use a tool belt like carpenters use and keep the bag of screws and plastic washers in it. Read the instructions a bunch of times and pay attention to the locations and which way things face compared to the base. The only thing I had real issue with was the top most part of the roof, and if I had a better ladder I'd have wedged a couple of 2x4s under the beam and put them on after getting all the panels on. Lifting one up from the center where it was attached was a pain, if you need to do it put one more panel on first. That being said despite seeming flimsy it's well designed and once it's all together it's VERY solid. I'm going to frame out a couple walls inside so I can add wood so I can hang stuff and lean things against the wall without worrying about denting it, but it's not needed for strength. I might add a little reinforcement just because we sometimes get a lot of snow and I don't feel like shoveling a roof etc.The bad: the door latch hardware is a joke. There is a gap so rain can pass through the center, I just added a strip of folded drip edging that I pounded flat and used the extra provided screws on the back of the fixed door (with latches on top and bottom). The fixed door latches are good. I also added screws along the edge of the roof, you don't even need to drill the screws they provide are very high quality and if you just want to add a screw here and there you just line it up where you want it and bump the back of your driver with your palm, the tips are sharp and will give you a bite enough to drive it through. Also they give you plenty of extra hardware.All said, I'm very happy with the shed. It's strong, looks good, the plastic on each panel really is just extra protection and I figure if it starts to peel from the sun it will be easy to take up piecemeal. Do your prep, have a good level surface for it, square your base well before you get going and pre-build everything you can, having the wall tops, roof beams, the peak of the roof with vents already installed and the braces etc. That made it a breeze. Once you get the corners up with one panel on each put your upper walls on get it all screwed in and you'll have it together in 6 hours.

Door closure:Where do I start? I bought it thought it looked easy to put together. The instructions are hard to follow as you have to look at it in reverse. When putting the roof together the top piece S2 S3 S4 don’t align correctly it’s as if S2 is not the correct length we gave up for the day. We’ll be going out to get self tapping sheet metal screws so I can at least finish the roof . None of the roof holes match. Do not buy this product unless you like the aggravation.

So, 90% of the "hole not right" issues were fixed when flipping the bar correctly. Item L1 bar (left of door) and L2 bar (right of door) DO matter. If you got the right ones on, and it's not lining up, flip it the other way. If you don't, you will basically be re drilling not only that wall, but the ceiling slates, and ** insert terrible reviews here**.We only drilled about 4 "new holes" out of the entire thing, and considering there's like a hundred screws/holes, that's pretty good.3 ppl best if in windy area, but will DEFINITELY need a hand in the beginning as the wall slates are kinda flimsy pre completion. There is no floor, but we need something portable, this was a benefit.We got 5x3. Guy in gray is 5'9-5'10 ish

DO NOT BUY!!! If I could give 0 stars, I would. Some of the panels are dented which I expected and was willing to look past. Instructions are no good. They are all photos with little explanation. I take my time with every step to ensure the best possible results and all that effort still doesn’t matter. The holes in the pieces do not line up properly which causes misalignment in multiple areas. One of the corners doesn’t even close at all. Some of the screw holes are the wrong size and will require additional screws to be purchased. This now causes all corner braces to be useless. I’m currently putting the roof together and I’m now questioning if I’ll even be able to complete the shed. The provided holes do not align correctly, which means I will have multiple holes in the roof *IF* this ever gets completed. I don’t mind drilling my own holes, however having extra holes where water can continuously leak in is unacceptable. I don’t know how to return this as I’ve spent all this time putting it together to this point but I need a refund! This is my worst purchase in years! You’ve been warned! Stay away from this shed. You WILL NOT have a good result. Complete waste of time.

All these sheds that look the same, are the same. They all are very thin metal and I expected some bent panels . There were several and they were not from shipping. They were from the factory. They even give you protective gloves for bending them back. The instruction book was pretty detailed and easy to follow but I've build mant things like this. A first timer might think twice. You really want to have a drill driver. There are a lot of screws. Be careful not to strip them out. Do not assume that just because pieces look the same, that tgey are. Take your time matching the numbers and layout to the directions. I had to do a few things over. Overall, it went together pretty good. I'm glad it went up against my house as I think it needs wind protection. I bought this brand because the ad said it weighed more than the others, but it doesn't. They are all the same. It works just fine for me, I got what I paid for and expected. The plastic sheds I've had, all warped very quickly.

Great for storing my tubes and chair cushions in my pool area. I put a shelf in it to hold the chair cushions. I put the tubes and rafts on the floor.